Manufacturer: Handwe
Manufacturer Part#: Handwe-CEP
This is a Handwe new version of this item. It now comes with leads to go inside your RV / Boat - Transition from outside to inside. The size variation refers to how long the wires are the go inside not on the roof. They are now red / black color wires to help with polarity identity inside. MC4 Connectors.
Making RV Solar Installation Easier
With the Cable Entry Plate, installation is cleaner and more flexible. No longer is the solar cable's entry limited to the refrigerator vent. With Handwe's Cable Entry Plate, run the wires through any part of the roof you choose, ideally as close as possible to the battery for the most efficient charging and minimizing energy loss. This product has been designed from the ground up to provide the best solution on the market for a cable entry port for RV rooftops.
Standard solar panel installation where cables are fed through the refridgerator vent.
Cable Entry Plate is used here to feed cables through any part of the roof.
High quality materials and smart design have gone into making this product the perfect companion to making a cleaner RV solar installation.
(1) Waterproof MC4 cable glands (IP68 rated) come pre-installed and tightened to the correct torque.
(2) Tough, UV-resistant polycarbonate plate able to absorb impact energy without cracking, even at low temperatures -40°F to 170°F (-40°C to 80°C)
(3) Molded-in rings seal against the underside of the screw heads
(4) Inside jam-nut thread locked for vibration resistance
(5) Built for 10 gauge MC4 style solar cables
(6) End holes provide strain relief when panel wires are connected
(7) Cradle supports expansion branch connectors to prevent damage
(8) Underside incorporates stiffening ribs and compression stops for all mounting screws
(9) Underside channels guide adhesive dispensing around screws, drilled hole & plate perimeter
